# NSF/ANSI 51 (Food Equipment Materials)

> The primary U.S. safety standard for materials used in commercial food equipment. NSF/ANSI 51 verifies that coatings, plastics, metals, and sealants in food contact zones won't leach harmful substances into food. For families, it's the baseline certification to look for on air fryer components, cookware coatings, and food prep surfaces - but it does not on its own guarantee PFAS-free materials.

**Type:** standards
**Categories:** air-fryer, cookware-set, frying-pan, water-filter
**Source:** https://www.r3recs.com/learn/standards/nsf-ansi-51

## Overview

When you see "NSF certified" stamped on commercial kitchen equipment or listed in an air fryer's spec sheet, that mark most likely traces back to NSF/ANSI 51 - the foundational U.S. standard for food equipment materials. It's one of those certifications that sounds narrow but actually covers a wide swath of what ends up in your kitchen and near your food.

NSF International (formerly the National Sanitation Foundation) published the first version of Standard 51 in the 1970s. The standard has been updated regularly - most recently in 2023 - and is now jointly maintained by NSF and ANSI (American National Standards Institute). The formal title is NSF/ANSI 51: Food Equipment Materials, and its core job is to verify that the materials used to make food equipment won't contaminate food.

## What NSF/ANSI 51 Actually Tests

The standard covers a deceptively broad scope. Any material that contacts food in commercial equipment - coatings, plastics, rubber seals, gaskets, solder, adhesives, metals, glass-like materials, and lubricants - must meet NSF/ANSI 51 requirements before it can be used in certified equipment. Here's what the testing evaluates:

**Material formulation review.** Every non-metal material (plastics, elastomers, coatings) must be made from substances permitted as indirect food additives under U.S. 21 CFR (Code of Federal Regulations), specifically the food contact sections CFR 174 through 179. NSF's technical team reviews the full formulation against those FDA-approved ingredient lists.

**Extractables and migration testing.** The standard evaluates whether a material will transfer harmful substances into food under realistic use conditions. This involves exposing the material to food simulants - standardized solutions that mimic acidic, aqueous, or fatty foods - at elevated temperatures for defined contact times. If chemical migrants exceed established thresholds, the material fails.

**Heavy metals testing.** NSF tests for lead, cadmium, and other regulated heavy metals. The 2023 update significantly expanded lead requirements: all materials in contact with water, coffee, or tea intended for human consumption must now be evaluated for weighted average lead content under NSF/ANSI/CAN 372 - not just products with brass or bronze components. Intentionally added lead is prohibited on all food contact surfaces, and unintentional lead impurities must remain below 0.06%.

**Taste and odor evaluation.** Materials are assessed to confirm they don't impart detectable off-flavors or odors to food. This protects both safety and food quality.

**Coating adhesion and physical durability.** Coatings must pass cleanability, corrosion resistance, impact resistance, abrasion resistance, and heat resistance tests. A coating that flakes, chips, or degrades under normal use conditions can both contaminate food physically and expose base materials that weren't intended to contact food.

**Ongoing surveillance.** Certification isn't a one-time event. NSF conducts annual facility audits and periodic product retesting. If a manufacturer changes a material formulation, the product must be re-evaluated. This is what separates certification from self-declaration.

## An Important Nuance: Fluoropolymer Coatings

Here's where families researching [air fryers](/category/air-fryer) and nonstick [cookware](/category/cookware-set) need to pay close attention: NSF/ANSI 51 contains an exemption for fluoropolymer coatings applied to heated food zones.

Fluoropolymers - which include PTFE (Teflon) and related [PFAS](/learn/ingredients/pfas) compounds - are exempt from the standard's usual extractables testing requirements. The rationale has historically been that cured PTFE polymer is chemically inert and won't migrate into food under normal use conditions. So a nonstick air fryer basket coated with PTFE can carry NSF 51 certification for its construction and lead content without having been tested for PFAS migration specifically.

This is the key gap that NSF 537 - the new PFAS-free certification launched in March 2025 - was designed to close.

## NSF 537: The PFAS-Free Layer on Top of NSF 51

On March 24, 2025, NSF International launched Certification Guideline 537: PFAS-Free Products for Nonfood Compounds and Food Equipment Materials. It's the first third-party PFAS-free certification specifically designed for food equipment.

To qualify for NSF 537, a food equipment material must:
1. First hold NSF/ANSI 51 certification (the baseline material safety requirement), AND
2. Contain no intentionally added PFAS of any kind, AND
3. Test below 50 parts per million total organic fluorine (TOF) - the analytical threshold for confirming no PFAS contamination at any meaningful level, AND
4. Use no post-consumer recycled materials that could introduce PFAS traces

TOF testing must be repeated annually to maintain the certification. This matters because PFAS can enter a material through cross-contamination during manufacturing even if they aren't intentionally added.

The first company to receive NSF 537 certification was ROCOL, for food-grade lubricants. For families evaluating air fryers and cookware, NSF 537 is now the most meaningful third-party signal that a food-contact coating is genuinely PFAS-free - not just PFOA-free or marketing-claim free. Certified products are listed in NSF's public database at listings.nsf.org.

## How NSF 51 Differs from NSF 42, 53, and 58

There's genuine confusion in the parenting community between NSF's food equipment standard and its water filter standards. They're distinct programs that test for entirely different things.

**NSF/ANSI 51 - Food Equipment Materials**: Applies to commercial and home food equipment. Tests the materials used to build equipment (coatings, metals, plastics, gaskets) for food safety. You'll see this on air fryers, commercial mixers, cutting boards, steam tables, and food prep surfaces. It does not test water filtration performance.

**NSF/ANSI 42 - Aesthetic Effects**: A water filter standard. Certifies that a filter reduces chlorine taste and odor, improving how water tastes and smells. It does not address health contaminants like lead or [PFAS](/learn/ingredients/pfas).

**NSF/ANSI 53 - Health Effects**: A water filter standard certifying reduction of specific health-risk contaminants including lead, cysts, and volatile organic compounds. Some NSF 53 certifications also cover PFAS reduction for long-chain compounds. Completely different scope from NSF 51.

**NSF/ANSI 58 - Reverse Osmosis Systems**: The most comprehensive [water filter](/category/water-filter) standard. Certifies that an RO system reduces a broad spectrum of dissolved contaminants - arsenic, nitrates, fluoride, PFAS - to safe levels. NSF 58 certified systems with PFAS claims achieve 95-99% removal. Not related to food equipment materials.

When you're shopping for a water filter, look for NSF 53 or NSF 58. When you're evaluating cookware or an air fryer's coatings, NSF 51 (and ideally NSF 537) is what matters.

## How Manufacturers Get NSF 51 Certified

The certification process is rigorous, typically taking 4 to 18 months depending on product complexity. Here's how it works:

1. **Application and documentation.** The manufacturer submits full material formulations, product specifications, and manufacturing process documentation to NSF.
2. **Formulation review.** NSF's technical team cross-references every ingredient in non-metal components against 21 CFR food contact regulations. Any ingredient not approved as an indirect food additive triggers a reformulation request.
3. **Testing protocol development.** Based on the product's intended use, NSF determines which physical and chemical tests apply - extractables panels, heavy metals analysis, taste/odor evaluation, coating durability tests.
4. **Laboratory testing.** NSF-accredited labs test product samples under the conditions of the assigned protocol.
5. **Facility audit.** An NSF auditor conducts an on-site inspection of the manufacturing facility to verify production processes, quality control systems, and material traceability.
6. **Certification decision.** If testing and audit pass, NSF issues certification. The product is added to the public NSF certified food equipment database.
7. **Annual surveillance.** NSF retests products and audits facilities on a recurring schedule. Material changes require re-evaluation and re-certification.

Manufacturers pay ongoing annual fees to maintain certification. This cost is part of why NSF certification is more common among commercial equipment brands and premium consumer cookware lines than budget products.

## Why This Matters for Air Fryer and Cookware Safety

For families making purchasing decisions around [air fryers](/category/air-fryer) and cookware, NSF/ANSI 51 is a useful baseline - but not the whole story.

NSF 51 tells you that a product's construction materials have been independently reviewed for compliance with FDA food contact regulations, that lead content has been verified, and that the manufacturer is subject to ongoing audits. It's a real credential, not marketing language.

What NSF 51 does not tell you - because of the fluoropolymer exemption - is whether a nonstick coating contains PTFE or other PFAS. An air fryer basket with a PTFE coating can display NSF 51 certification without that coating having been tested for PFAS migration. This is why the [PFAS-free claim](/learn/concepts/pfas-free-claim) on cookware requires additional scrutiny beyond NSF 51 alone.

The emerging standard of care for families who want to minimize PFAS exposure from food contact surfaces is to look for:
- NSF/ANSI 51 certification as the baseline (material safety, lead, extractables), PLUS
- NSF 537 PFAS-free certification as the additive layer (confirms no PFAS in the material at 50 ppm TOF threshold), OR
- An explicit PTFE-free and PFAS-free claim backed by third-party testing data, OR
- Uncoated materials - stainless steel, cast iron, ceramic - that are PFAS-free by chemistry and don't require coating certifications

For families in California, the context expands further. California AB 1200, which took full effect for product labeling in January 2024, requires cookware manufacturers to disclose on product labels and websites all intentionally added chemicals from a designated list - including PFAS - present in any food-contact surface. AB 1200 also prohibits brands from claiming a product is "PFAS-free" if it contains any PFAS compound, including PTFE. This means California-sold products now carry mandatory chemical disclosure that, in theory, gives consumers more information than NSF 51 alone provides.

## How to Verify NSF Certification

NSF maintains a public, searchable certification database at listings.nsf.org. You can search by company name, product type, or certification standard. For food equipment, filter by NSF/ANSI 51 to see certified materials and products.

For NSF 537 PFAS-free certifications specifically, certified nonfood compounds appear in the NSF White Book and certified food equipment materials appear in the NSF Certified Food Equipment listing - both accessible through the same listings.nsf.org portal.

A few important caveats when using the database: certification is tied to specific product models and formulations, not brand names broadly. A manufacturer may have one NSF 51-certified coating and ten other products that aren't certified. Always search the specific product, not just the brand.

Also: the NSF mark on a product should match exactly what's listed in the database. "Tested to NSF standards" is not the same as NSF certified - a distinction NSF itself emphasizes. If a product claims certification but the listing can't be found in the database, that's a red flag worth pursuing with the manufacturer directly.

## The Bottom Line for Families

NSF/ANSI 51 is the right starting point when evaluating food equipment materials - it means the materials have been independently tested against FDA food contact regulations, not just self-declared safe by the manufacturer. The 2023 update strengthened lead requirements meaningfully.

But NSF 51 alone doesn't answer the PFAS question for coated cookware and air fryer baskets. That's where NSF 537 (launched March 2025) steps in as the most credible additive certification. Until NSF 537 adoption becomes widespread, families who want to minimize PFAS from cooking surfaces are best served by choosing uncoated stainless steel or verified-PFAS-free ceramic alternatives - or verifying directly with manufacturers whether their coatings have been tested under NSF 537.

## Also Known As

- NSF 51
- ANSI/NSF 51
- Food Equipment Materials Standard
- NSF Food Equipment Certification

## Where Found

- Air fryer baskets, crisper trays, and interior surfaces
- Commercial cooking equipment - broilers, griddles, stock pots, steam tables
- Nonstick cookware coatings and base materials
- Food prep surfaces - cutting boards, countertop materials
- Equipment components - gaskets, seals, tubing, valves, sealants
- Beverage dispensing equipment
- Refrigeration and cold storage equipment used in commercial kitchens

## Label Guide

**Look for:**
- NSF/ANSI 51 certified - confirms materials independently tested against FDA food contact regulations
- NSF 537 PFAS-free certified - the additive certification confirming total organic fluorine below 50 ppm
- Stainless steel basket or interior - no coating to certify, inherently free of coating-based PFAS risk
- Ceramic coating with explicit PFAS-free test data - verified PFAS-free by chemistry
- California AB 1200 compliant disclosure - required on cookware sold in California showing intentionally added chemicals

**Avoid / misleading:**
- NSF tested or tested to NSF standards without certification number - does not equal certified
- PFOA-free with NSF 51 listed - NSF 51 exempts fluoropolymer coatings; the product may still contain PTFE
- NSF certified with no standard number specified - ask which standard; NSF 42, 53, and 58 are water filter standards, not food equipment standards
- Non-toxic without third-party certification - legally unregulated term with no testing requirement

## How To Verify

Check the NSF certified food equipment database at listings.nsf.org. Search by manufacturer name and filter by Standard 51 to see specific certified materials and products. For NSF 537 PFAS-free certifications, use the same database and filter for Guideline 537. Certification is model-specific - always search the exact product, not just the brand. To confirm whether a specific claim is accurate, NSF can be contacted directly at 1-800-NSF-MARK or via nsf.org.

## What This Does Not Cover

NSF/ANSI 51 does not cover water filtration performance - that falls under NSF 42 (aesthetic), NSF 53 (health effects), and NSF 58 (reverse osmosis). It does not certify the overall safety or design of finished consumer appliances - that's UL or ETL territory. It does not require PFAS-free coatings - fluoropolymer coatings on heated food zones are exempted from extractables testing. And it does not apply to food packaging materials - those are governed by FDA 21 CFR and separate NSF/ANSI standards.

## R3 Bottom Line

- NSF/ANSI 51 is a meaningful baseline certification - it confirms a product's food-contact materials have been independently tested against FDA food contact regulations and aren't just self-declared safe by the manufacturer
- NSF 51 does not guarantee PFAS-free coatings - fluoropolymer (PTFE/Teflon) coatings on heated food zones are exempt from the standard's extractables testing, so a PTFE-coated air fryer basket can still carry NSF 51 certification
- For PFAS-free assurance, look for NSF 537 certification (launched March 2025) on top of NSF 51 - it's the first third-party standard that requires Total Organic Fluorine testing below 50 ppm annually
- Verify any NSF certification claim directly at listings.nsf.org before buying - "tested to NSF standards" is not the same as certified, and certification is model-specific, not brand-wide
- The safest path for families avoiding PFAS from cookware surfaces remains uncoated materials - stainless steel, cast iron, or third-party-tested ceramic - that don't require certification to confirm the absence of fluorochemicals

## FAQ

### What does NSF/ANSI 51 certification mean on an air fryer or cookware?

NSF/ANSI 51 means the materials used to construct the product's food-contact surfaces have been independently reviewed and tested by NSF International against U.S. FDA food contact regulations (21 CFR 174-179). It verifies that coatings, plastics, and metals in the food zone are made from approved ingredients, that lead content meets strict limits, and that the manufacturer undergoes ongoing audits. It does not guarantee the product is PFAS-free - nonstick fluoropolymer coatings like PTFE are specifically exempt from the standard's extractables testing.

### Does NSF 51 mean a product is PFAS-free?

No. NSF/ANSI 51 contains an explicit exemption for fluoropolymer coatings on heated food zones, which means PTFE (Teflon) and other PFAS-based nonstick coatings are not tested for PFAS migration under this standard. A PTFE-coated air fryer basket can carry NSF 51 certification without its coating having been tested for PFAS. For genuine PFAS-free assurance, look for NSF 537 certification (launched March 2025), which requires total organic fluorine testing below 50 ppm. See our guide on the [PFAS-free claim](/learn/concepts/pfas-free-claim) for how to read marketing language critically.

### How is NSF 51 different from NSF 42, 53, or 58?

NSF 51 governs food equipment materials - the coatings, metals, and plastics used to build cooking and food prep equipment. NSF 42, 53, and 58 are water filtration standards with no overlap. NSF 42 covers aesthetic water improvements (taste and odor from chlorine). NSF 53 certifies filters for health-effect contaminants like lead and some PFAS. NSF 58 certifies reverse osmosis systems for broad-spectrum removal including arsenic, nitrates, and PFAS. If you're buying a water filter, NSF 42, 53, or 58 is relevant. If you're evaluating cookware or an air fryer, NSF 51 (and ideally NSF 537) is what matters.

### What is NSF 537 and how does it differ from NSF 51?

NSF Certification Guideline 537 is a PFAS-free certification launched in March 2025 that builds on top of NSF/ANSI 51. To qualify, a food equipment material must first hold NSF 51 certification, then additionally test below 50 parts per million total organic fluorine (TOF) - a threshold that confirms no meaningful PFAS contamination. TOF testing must be repeated annually. NSF 51 is the baseline material safety standard; NSF 537 is the additive certification that specifically closes the PFAS gap that NSF 51 leaves open.

### How can I verify if a product is actually NSF 51 certified?

Search listings.nsf.org - NSF's public certification database. Filter by food equipment and search by company name or product. Certification is model-specific, not brand-wide, so search the specific product, not just the manufacturer name. If a product claims NSF certification but doesn't appear in the database, contact NSF directly at 1-800-NSF-MARK or [email protected] to confirm. The phrase 'tested to NSF standards' on packaging is not equivalent to certification - it can mean testing was conducted without a passing certification being issued.

### Does NSF 51 apply to home cookware, or only commercial equipment?

NSF/ANSI 51 was originally written for commercial foodservice equipment - restaurant kitchens, commercial broilers, institutional food prep surfaces. A parallel standard, NSF 390, covers consumer stovetop cookware for the retail market. However, NSF 51 material certification is widely referenced across both commercial and consumer products because it applies to the underlying materials and coatings that go into any food-contact surface. When a consumer air fryer or cookware brand cites NSF 51, they're typically referring to their coating material or component certifications, not the finished consumer product as a whole.

### What happens if a manufacturer changes their formula after getting NSF 51 certified?

Any change to a material's formulation - switching a polymer, adding an ingredient, changing a processing aid - requires the manufacturer to notify NSF and undergo re-evaluation. NSF's annual facility audits are designed to catch undisclosed formulation changes. If a material change is found during surveillance that wasn't disclosed, certification can be suspended or revoked. This ongoing requirement is one of the key differences between NSF certification and a manufacturer's self-declaration of safety.

### What does California AB 1200 add on top of NSF 51 for cookware?

California AB 1200, fully effective January 2024, requires cookware manufacturers to disclose on product labels and brand websites any intentionally added chemicals from a designated list - including all PFAS - present in food-contact surfaces. It also prohibits PFAS-free claims if the product contains any PFAS, including PTFE. This is a transparency law, not a safety certification, but it effectively requires cookware brands selling in California to be more explicit about coating chemistry than NSF 51 alone demands. For families, it means California-sold products should carry chemical disclosure information that helps fill the gap NSF 51 leaves on PFAS.

## Sources

- [NSF/ANSI 51-2023: Food Equipment Materials - The ANSI Blog](https://blog.ansi.org/ansi/nsf-ansi-51-2023-food-equipment-materials/) — *ANSI* (2023)
- [NSF/ANSI 51, Food Equipment Materials Update and Implications for Your Products](https://www.nsf.org/knowledge-library/nsf-ansi-51-food-equipment-materials-update-implications-for-your-products) — *NSF International* (2023)
- [NSF Introduces PFAS-Free Certification (NSF 537)](https://www.nsf.org/news/nsf-introduces-pfas-free-certification) — *NSF International* (2025)
- [NSF 537: New PFAS-Free Certification for Food Industry Equipment](https://www.food-safety.com/articles/10254-nsf-537-new-pfas-free-certification-for-food-industry-equipment-chemical-suppliers) — *Food Safety Magazine* (2025)
- [PFAS-Free Certified Nonfood Compounds and Food Equipment Materials](https://www.nsf.org/food-beverage/commercial-food-equipment/nsf-537-pfas-free-certification-nonfood-compounds-food-equipment-materials) — *NSF International* (2025)
- [NSF/ANSI 51 and NSF/ANSI 61 Product Certifications for Food and Drinking Water Applications](https://www.nsf.org/knowledge-library/nsf-ansi-51-and-nsf-ansi-61-product-certifications-for-food-and-drinking-wa) — *NSF International* (2024)
- [NSF/ANSI Standard 51 Lead Content Changes](https://www.nsf.org/knowledge-library/nsf-ansi-standard-51-lead-content-changes) — *NSF International* (2023)
- [What is NSF/ANSI 51-2017? Complete Guide](https://mpofcinci.com/blog/what-is-nsf-ansi-51-2017/) — *MPC (Metal Products of Cincinnati)* (2022)
- [California AB 1200 - Safer Food Packaging and Cookware Act](https://www.bcpp.org/resource/california-safer-food-packaging-and-cookware-act-ab-1200/) — *Breast Cancer Prevention Partners* (2024)
- [Search for NSF Certified Food Equipment](https://info.nsf.org/certified/food/) — *NSF International* (2025)
- [NSF Announces PFAS-Free Certification for Nonfood Compounds and Food Equipment Materials](https://www.lawbc.com/nsf-announces-pfas-free-certification-for-nonfood-compounds-and-food-equipment-materials/) — *Bergeson & Campbell, P.C.* (2025)
- [NSF 42, 53, 58, 401 and More: Water Filter Certifications Explained](https://waterfilterguru.com/nsf-ansi-standard-certifications-explained/) — *Water Filter Guru* (2024)

---

Source: https://www.r3recs.com/learn/standards/nsf-ansi-51
Methodology: https://www.r3recs.com/methodology/how-we-score-products